London Car AlarmAlarmsImmobilizersAccessoriesTrackersMultimedia


Toad Ai606 Car Alarm Remote Control Fob Programming Procedure

 
Toad Ai606 Toad Car Alarm Ai606 Remote Control Fob Toad Car Alarm 4 Button Remote
 

Programming service from £25

 
PROGRAMMING

To enter a 4 digit PIN code; for example 4030


Turn the Ignition on off on off on within 7 seconds, leaving it “on”.

The LED will now flash Red quickly for 3 seconds, then slows to 1 flash per second.
Count the slow Red flashes until the 4th occurs - turn the ignition “off” immediately after the LED extinguishes (FIRST PIN NUMBER HAS BEEN ENTERED.... ie 4 )
Turn the ignition “on” - The LED illuminates Green, then slowly flashes Red, before the 1st slow Red flash - turn the ignition “off”.(SECOND PIN NUMBER HAS BEEN ENTERED....ie 0 )
Turn the ignition “on” - The LED illuminates Green, then slowly flashes Red. Count the slow Red flashes until the 3rd occurs - turn the ignition “off” immediately after the
LED extinguishes..(THIRD PIN NUMBER HAS BEEN ENTERED....ie 3 )

Turn the ignition “on” - The LED illuminates Green, then slowly flashes Red.
Before the 1st slow Red flash - turn the ignition “off”.(FORTH PIN NUMBER HAS BEEN ENTERED....ie 0 )
Note: As shown above, a 0-digit is entered by turning the ignition “off” immediately after the LED has finished
 

 

2006 (ń) Copyright London Car Alarm Company.
Web design service by Micrologic.org