London Car AlarmAlarmsImmobilizersAccessoriesTrackersMultimedia


 

 



Prestige X1 User Manual

 

 

 


 
FEATURES & SPECIFICATIONS
Arm / Disarm
Dual stage shock sensor
Panic mode / Anti hijacking (Car Dependant)
Valet mode
Auto re-arming (Car Dependant)
Ignition locking/Footbrake locking (Car Dependant)
Remote door lock / unlock
Remote boot release (if installed)
Last door rearming(Car Dependant)
Passive locking (Car Dependant)
Interior light delay
Car finder
Override mode
Silent arm/disarm
Door lock/unlock pulse defaults
Keyless entry
Channel 3 output
Automatic and manual anti-hijacking (Car Dependant)

 

TRANSMITTER BUTTONS
Consider top button as 1
Consider bottom button as 2

 

FUNCTION

Key Function

Button

Armed

Disarmed

Ignition On

PRESS BUTTON 1

ONCE

DISARM/UNLOCK

ARM/LOCK

LOCK/UNLOCK

 

PRESS BUTTON 1

FOR 3 Sec.

PANIC

PANIC

 

 

PRESS BUTTON 2

FOR 2 sec.

BOOT RELEASE

BOOT RELEASE

BOOT RELEASE

 

PRESS BUTTON 1+2 ONCE

SILENT DISARM

SILENT ARM

ANTI-HIJACKING

 

PRESS BUTTON 2 then 1

CHANNEL 3

CHANNEL 3

CHANNEL 3

 

 

Remote Transmitter Code Learning

With the alarm disarmed and all the doors closed, switch the ignition ON. Within 10 seconds press the valet switch 3 times, after 2 seconds, the siren will chirp for 2 seconds and then the system enters into the code learning mode. Within another 10 seconds, press any button of the first transmitter, the siren will chirp for 1 seconds and lights flash twice to confirm the code has been learned. Apply the same procedure within next 10 seconds for the second transmitter. The system will leave the code learning mode after finishing learning the code for 2 transmitters. If two transmitters are not programmed, the ignition is switched OFF or the time exceeds the 10-second programming time, the system will leave the code learning mode.

ARM MODE

With the alarm disarmed, press button (1) when the ignition is off, the siren will chirp once, lights flash once and doors lock (if connected and depending on the default as 1 or 4 seconds), the LED flashes slowly, the immobiliser turns on, and the system enters into the arm mode.

Silent Arm/Disarm

  1. Press button (1) and (2) once simultaneously, the system will enter into the silent arm/disarm. The siren will not chirp. If doors, bonnet or boot are not closed properly, the indicator lights will flash three times and the LED will flash to indicate that doors, bonnet or boot are not closed properly. The triggers of the above three sensors will be bypassed until they are closed properly.
  1. When the system is silent disarmed and the alarm has been triggered in the users absence, the immobiliser will turn off, indicator lights flash three times, the siren will chirp four times and the LED flashes the trigger status. Then the system will enter into the auto rearm mode.

Sensor Bypass

After pressing button (1) to arm, then press button (1) again within 3 seconds, the siren will chirp once and the shock sensor will be bypassed

DISARM MODE
When the system is armed, press button (1) once, the siren will chirp twice, lights flash twice and doors will unlock (if connected). The immobiliser will turn off and the LED flashes rapidly, then the system enters into the auto rearm mode (i.e. The system will rearm itself in 30 seconds if a door is not opened).

With the system armed, press button (1) once, the siren will chirp 4 times if there was a trigger in your absence. The indicator lights will flash three times and the doors will unlock (if connected), the immobiliser will turn off, the LED will flash trigger memories and then the system enters into the auto rearm mode (ie. The system will rearm itself in 30 seconds if a door is not opened).

 

Trigger Memory
If the 2-stage shock sensor triggered, If boot or bonnet triggered, If doors triggered, If ignition triggered
LED is in the cycle of flashing once and off. LED is in the cycle of flashing twice and off. LED is in the cycle of flashing three times and off. LED is in the cycle of flashing four times and off.

Clear trigger memories: After pressing the button to disarm, switch the ignition on to clear the trigger memories.

ALARM
A. 1st-stage Shock Sensor Trigger:

When the system is armed the siren will chirp three times when this sensor is triggered. If three constant triggers are received from the first-stage trigger then the first-stage shock sensor will be bypassed until the system is rearmed.

B. 2nd-stage Shock Sensor Trigger:

When the system is armed, the siren will sound for 30 seconds when this sensor is triggered. The indicator ights will flash for 30 seconds, the LED will start a cycle of flashing once and then off, the system will remain armed. If three constant triggers are received from the second-stage shock sensor, then the second-stage shock sensor will be bypassed until the system is rearmed.

C. Bonnet or Boot Trigger

a. When the system is armed, the siren will sound for 30 seconds if bonnet or boot is triggered. The siren will sound for 30 seconds, indicator lights will flash for 30 seconds, the LED will start a cycle of flashing twice and then off, the system will remain armed.

b. When the system is armed, if the bonnet or boot is triggered and then are left open, the siren will alarm for three cycles with an interval of 3 seconds between each cycle. The system will remain in the armed mode but the bonnet and boot sensors will be bypassed until they are closed properly.

D. Door Trigger

a. When the system is armed, the system will alarm if the doors are triggered. The siren will sound for 30 seconds, indicator lights will flash for 30 seconds, the LED will start a cycle of flashing three times and then off, the system will remain in the armed mode.

b. When the system is armed, the system will alarm for 3 cycles if doors are triggered and not closed the siren will alarm for three cycles with an interval of 3 seconds between each cycle. After 3 alarm cycles, the system will remain in the armed mode but the door sensors will be bypassed until doors are closed properly.

E. Ignition Trigger

When the system is armed, if the ignition is triggered (turned on), the siren will sound for 30 seconds, the LED will start a cycle of flashing four times and then off, the system will remain in armed mode.

    When the system is armed, if the ignition is triggered and left turned on, the system will alarm for three cycles with an interval of 3 seconds between each cycle. After 3 alarm cycles, the system will remain in the armed mode but the ignition sensor will be bypassed until the ignition is turned off.

F. Alarm Disable:

The system will remain in armed mode after the 30-second alarm time.

    During the alarm being triggered, press button (1) once, the system will disarm. The siren will chirp 4 times, the immobiliser will turn off, the indicator lights will flash three times, doors unlock (if connected) and the LED will flash the trigger memories.
 

 

2006 () Copyright London Car Alarm Company.
Web design service by Micrologic.org